Tiago Emanuel Pereira Gomes | Membros

Categoria: Bolseiro
Unidade Orgânica: Department of Mechanical Engineering
Email: tiago.emanuel.gomes@ua.pt
Ciência ID: 9B14-A113-9F83
ORCID iD: 0000-0002-9134-2238

Tiago Emanuel Pereira Gomes completed his PhD on February 20, 2026, in the context of the Doctoral Program in Mechanical Engineering, at the Centre for Mechanical Technology and Automation. His doctoral research focused on developing a solution to increase the number of reprocessing cycles that a thermoplastic can undergo in an additive manufacturing context. To this end, he studied the effects of reprocessing on material properties, methods for detecting material degradation during processing using predictive algorithms and non-destructive monitoring techniques, and additives for repairing thermoplastics at the molecular level.

Before that, he had completed his Integrated Master’s Degree in Mechanical Engineering on July 23, 2018, at the University of Aveiro, after which he participated as a research fellow in the mobilizing project TOOLING4G. Within the project, he developed low-cost, open-source monitoring solutions for plastic injection molds.

He is currently a research fellow in the context of the Mobilizing/Green Agenda for Business Innovation “ATE – Alliance for the Energy Transition.” He has experience with CAD software such as SolidWorks and Fusion 360, as well as numerical simulation tools including Abaqus and Ansys. He also applies programming tools in his work, primarily using the Python language.

0
financiamentos
0
publicações

Financiamentos

Enabling closed loop additive manufacturing through an on-demand feedstock material customization system
12/31/2023
SFRH/BD/143429/2019
TOOLING4G Advanced tools for smart manufacturing
02/28/2021
POCI-01-0247-FEDER-024516
https://tooling4g.toolingportugal.com/
ATE - Aliança para a Transição Energética
02/C05-i01.02/2022.PC644914747-00000023
https://www.ua.pt/pt/agendasprr/ate
Research Infrastructures Roadmap - TEMA
Centro de Tecnologia Mecânica e Automação

Publicações

Mechanical Characterization of CNT/PLA Parts via FFF Additive Manufacturing
Cavalcanti, Daniel K. K.; Gomes, Tiago; Neto, Victor; Valente, Robertt; Wu, Yiyun
Polymer Engineering & Science | 2026
https://doi.org/10.1002/pen.70384
Degradation assessment and properties recovery in closed-loop material extrusion additive manufacturing with PLA
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
3d ICOMAS: 3-day International Conference on Materials Science (2nd Edition) | 2025
Graphene-based paintable coating for an alternative large power transformer electrostatic ring structure
Andrea Soto; Gonçalves, Idalina; Lopes, Ricardo C.; Mário Maia; Neto, Victor; Tavares, Sérgio; Tiago E. P. Gomes
International symposium on Innovation in Polymer Applications (IPA 25) | 2025
Closed-loop PLA reprocessing: using an artificial neural network to classify tensile strength evolution
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
International symposium on Innovation in Polymer Applications (IPA 25) | 2025
Enabling Closed Loop Plastics Processing
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
International Conference on Polymer Process Innovation (fourth edition) PPI 2024 | 2024
Extrudability and 3D printing ability of starch/oil/PBAT-based blends
Brites, Paulo; Coimbra, Manuel; Ferreira, Paula; Gomes, Tiago; Gonçalves, Idalina; Lopes, Joana; Nunes, Cláudia; Oliveira, Gonçalo; Santos, Jéssica, D. C.
6th EPNOE International Polysaccharide Conference | 2024
How can poly(lactic acid) be reprocessed more times with minimal quality loss?
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
Research Summit 2024 | 2024
Chain extension of PLA reprocessed multiple-times for FFF
Dias-de-Oliveira, João; Magalhães da Silva, Sara; Martinho Oliveira; Neto, Victor; Tiago E. P. Gomes
TEchMA2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2024
Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials
Cadete, Mylene S.; Gomes, Tiago E. P.; Gonçalves, Idalina; Neto, Victor
Progress in Additive Manufacturing | 2024
https://doi.org/10.1007/s40964-024-00608-x
Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid
Cadete, Mylene S.; Gomes, Tiago E.P.; Gonçalves, Idalina; Neto, Victor
3D Printing and Additive Manufacturing | 2023
https://doi.org/10.1089/3dp.2022.0088
Reprocessed PLA filament extrusion: In-process degradation assessment and mitigation through a soft sensor
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
8th European Congress on 3D Printing & Additive Manufacturing | 2023
Effects of 1,3-phenylene-bis-oxazoline (PBO) chain extender on the rheological and thermal properties of reprocessed polylactic acid (PLA)
Dias-de-Oliveira, João; Magalhães da Silva, Sara; Martinho Oliveira; Neto, Victor; Tiago E. P. Gomes
Ciência 2023 Encontro com a Ciência e a Tecnologia em Portugal | 2023
Reprocessed PLA degradation assessment and mitigation for closed-loop FFF filament extrusion
Dias-de-Oliveira, João; Magalhães da Silva, Sara; Martinho Oliveira; Neto, Victor; Tiago E. P. Gomes
Research Summit 2023 | 2023
Non-destructive reprocessed PLA degradation evaluation and control in FFF filament extrusion
Dias-de-Oliveira, João; Magalhães da Silva, Sara; Neto, Victor; Oliveira, JM; Tiago E. P. Gomes
TEchMA: 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2023
Development of an Open-Source Injection Mold Monitoring System
António J. Pontes; João Silva; Jorge A. F. Ferreira; Mylene S. Cadete; Neto, Victor; Renato Febra; Tiago E. P. Gomes; Tiago Noversa
Sensors | 2023
https://doi.org/10.3390/s23073569
Prediction of mechanical properties of parts produced from reprocessed thermoplastics within an additive manufacturing framework
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
TEchMA2022: 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2022
Using machine learning to predict mechanical properties of reprocessed PLA
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
Ciência 2022 Encontro com a Ciência e Tecnologia em Portugal | 2022
Reprocessability of PLA through Chain Extension for Fused Filament Fabrication
Carlos Correia; Idalina Gonçalves; Tiago E. P. Gomes; Victor Neto
Journal of Manufacturing and Materials Processing | 2022
https://doi.org/10.3390/jmmp6010026
Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices
Cadete, Mylene S.; Dias-de-Oliveira, João; Gomes, Tiago EP; Neto, Victor
Polymer Degradation and Stability | 2022
https://doi.org/10.1016/j.polymdegradstab.2022.109850
Desenvolvimento de um sistema em open-sorce para monitorização do molde de injeção
Ferreira, JA; João Silva; Mylene S. Cadete; Neto, Victor; Pontes, António J.; Renato Febra; Tiago E. P. Gomes; Tiago Noversa
12º Congresso Nacional de Mecânica Experimental – CNME2020 | 2021
Enabling closed-loop additive manufacturing through an on-demand feedstock material customization system
Dias-de-Oliveira, João; Neto, Victor; Tiago E. P. Gomes
Encontro Ciência’21 – Encontro com a ciência e a tecnologia em Portugal | 2021
4D Printing: Development of fused filament fabrication structures with the ability to shape-shift
Dina Gamelas; Mylene S. Cadete; Tiago E. P. Gomes; Victor Fernando Santos Neto
TEchMA2021: 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2021
Polymeric foams from recycled thermoplastic Poly(ethylene terephthalate)
Cadete, M.S.; Carvalho, P.J.; Gomes, T.E.P.; Mylene S. Cadete; Neto, V.F.; Pedro Carvalho; Tiago E. P. Gomes; Victor Fernando Santos Neto
Journal of Cellular Plastics | 2020
http://www.scopus.com/inward/record.url?eid=2-s2.0-85089175154&partnerID=MN8TOARS
Development of 4D structures for custom bolus production for external radiotherapy
Adriana S. Martins; Anabela Dias; Mylene S. Cadete; Susana Gonçalves; Tiago E. P. Gomes; Victor Fernando Santos Neto
TEchMA2020 - 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2020
Enabling closed loop additive manufacturing through an on-demand feedstock material customization system
Cadete, Mylene; Dias-de-Oliveira, João; Gomes, Tiago; Neto, Victor
2nd International Conference of TEMA: Mobilizing Projects | 2019
A Model for the Prediction of Mechanical Properties of Parts Produced by Fused Filament Fabrication
Cadete, Mylene; Dias-de-Oliveira, João; Gomes, Tiago; Neto, Victor
Congress on Numerical Methods in Engineering – CMN 2019 | 2019
Polymer Matrix Nanocomposites for 3D Printing
Cadete, Mylene S.; Costa, Alfredo; Dias-de-Oliveira, João; Fonseca, Maria; Gomes, Tiago E. P.; Neto, Victor
Progress in Digital and Physical Manufacturing | 2019
http://dx.doi.org/10.1007/978-3-030-29041-2_23
Morphing Shapes by 3D printing
João Dias; João Tavares; Luis alves; Mário Oliveira; Mylene S. Cadete; Renato Couto; Tiago E. P. Gomes; Victor Neto
2nd International Conference of TEMA: mobilizing projects | 2019
Using recycled polymers for fused filament fabrication applications
Dias-de-Oliveira, João; Gomes, Tiago; Neto, Victor
8th Bi-Annual PMI2018 International Conference on Polymers and Moulds Innovations | 2018
De resíduo a Novos Produtos Poliméricos - Transformação de Plástico Reciclado em Produtos Impressos e Espumas
António Ramalho; João Dias-de-Oliveira; Mylene S. Cadete; Tiago E. P. Gomes; Victor Fernando Santos Neto
1ª Conferência do Centro de Tecnologia Mecânica e Automação | 2018

Dados fornecidos por

Financiamentos

Enabling closed loop additive manufacturing through an on-demand feedstock material customization system

TOOLING4G Advanced tools for smart manufacturing

ATE - Aliança para a Transição Energética

Research Infrastructures Roadmap - TEMA

Centro de Tecnologia Mecânica e Automação

Publicações

Mechanical Characterization of CNT/PLA Parts via FFF Additive Manufacturing

Degradation assessment and properties recovery in closed-loop material extrusion additive manufacturing with PLA

Graphene-based paintable coating for an alternative large power transformer electrostatic ring structure

Closed-loop PLA reprocessing: using an artificial neural network to classify tensile strength evolution

Enabling Closed Loop Plastics Processing

Extrudability and 3D printing ability of starch/oil/PBAT-based blends

How can poly(lactic acid) be reprocessed more times with minimal quality loss?

Chain extension of PLA reprocessed multiple-times for FFF

Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials

Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid

Reprocessed PLA filament extrusion: In-process degradation assessment and mitigation through a soft sensor

Effects of 1,3-phenylene-bis-oxazoline (PBO) chain extender on the rheological and thermal properties of reprocessed polylactic acid (PLA)

Reprocessed PLA degradation assessment and mitigation for closed-loop FFF filament extrusion

Non-destructive reprocessed PLA degradation evaluation and control in FFF filament extrusion

Development of an Open-Source Injection Mold Monitoring System

Prediction of mechanical properties of parts produced from reprocessed thermoplastics within an additive manufacturing framework

Using machine learning to predict mechanical properties of reprocessed PLA

Reprocessability of PLA through Chain Extension for Fused Filament Fabrication

Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices

Desenvolvimento de um sistema em open-sorce para monitorização do molde de injeção

Enabling closed-loop additive manufacturing through an on-demand feedstock material customization system

4D Printing: Development of fused filament fabrication structures with the ability to shape-shift

Polymeric foams from recycled thermoplastic Poly(ethylene terephthalate)

Development of 4D structures for custom bolus production for external radiotherapy

Enabling closed loop additive manufacturing through an on-demand feedstock material customization system

A Model for the Prediction of Mechanical Properties of Parts Produced by Fused Filament Fabrication

Polymer Matrix Nanocomposites for 3D Printing

Morphing Shapes by 3D printing

Using recycled polymers for fused filament fabrication applications

De resíduo a Novos Produtos Poliméricos - Transformação de Plástico Reciclado em Produtos Impressos e Espumas