- Categoria
- Investigador
- Unidade Orgânica
- Universidade de Coimbra
- horovistiz@ua.pt
- Ciência ID
- F710-1EBF-D052
Dra. Ana Horovistiz has a degree in Chemical Engineering from the Faculty of Chemical Engineering of Lorena, EEL-USP, master in Mechanical Engineering, Universidade Estadual Paulista, UNESP, PhD in Sciences and Materials Engineering, University of Aveiro, Portugal. She has proficiency in the following areas: Digital microscopy applied to microstructural and surface characterization of engineering materials; Different techniques for materials processing, in particular on ceramic materials; structural characterization from XRD data analysed with Rietvield refinements; electric and electrochemical characterization of materials, using electrochemical impedance spectroscopy. Dr Horovistiz is researcher at the Center for Mechanical Technology and Automation (TEMA) -Department of Mechanical Engineering-University of Aveiro FAMASI Project - Manufacturing by Intelligent and Sustainable Machining (Co.Pi). Currently, she is PRR science manager on University of Aveiro. She has published 43 articles in indexed journals; 5 conference articles; 2 chapters of books. Supervision of master's theses (4 completed and 2 on going) and 3 doctoral thesis (1 completed and 2 on going).
- 0financiamentos
- 0publicações
Financiamentos
Adapting Manufacturing Processes for Energy Savings-AMAPES
12/01/2026
FRDC/EME-EME/31556/2024Heat pumps and electrical elevator performance equipment
MUCAEN-Multiplas cápsulas endoscópicas
06/01/2022
PTDC/EMD-EMD/28960/2017FAMASI-Sustainable and Intelligent manufacturing by machining
Science and Technology Management- Industrial Property and Creation of Spin Offs
2018
UID/EMS/00481/2013Development of functionalized porous ceramic materials for water pollutant removal by filtration
2016
201767/2015-5Compósitos celulares à base de materiais com mudanças de fase com elevada condutividade térmica e estabilização de forma
2015
PTPC/CTM-ENE/2073/2012Revestimentos de Diamante para componentes Anti-Desgaste
2013
ref. 13118Evaluation of effect of co-dopants with different valencies on Cerium Gadolinium oxide based materials. Structural and electrical analysis.
2010
13119
Publicações
Application of a novel automatic filler delivery method in induction brazing of copper pipes in heat pump manufacturing: A comparative study with pre-placed ring method
Bastos, Antonio A.; Dias, João M.S.; Horovistiz, Ana; Lemma, Eyuel A.; Pereira, Daniel
Materials Today Communications | 2026Compressive and shear behaviour of novel non-crimp fabric composites for sustainable and lightweight electrical mobility
ALVES, JOÃO PEDRO; António Manuel de Bastos Pereira; Gabriel Constantinescu; Horovistiz, Ana; José Paulo Oliveira Santos; Luís, Salomé; Mario Sousa Henriques; Syed Tahir Ali Shah
TEchMA 2025 – New frontiers in mechanical engineering | 2025Tensile and flexural characterizations of biaxial non-crimp fabric composites for sustainable, two-wheeled electric vehicle chassis
ALVES, JOÃO PEDRO; António Manuel de Bastos Pereira; Gabriel Constantinescu; Horovistiz, Ana; José Paulo Oliveira Santos; Luís, Salomé; Mario Sousa Henriques; Syed Tahir Ali Shah
TEchMA 2025 – New frontiers in mechanical engineering | 2025Electron beam welding parameters for copper and dissimilar copper joints: Review, research gaps, and future challenges
Bastos, António; Dias, João M.S.; Duraisamy, Sathishkumar; Horovistiz, Ana; Mascate, Bernardo
Journal of Advanced Joining Processes | 2025Electron beam welding optimization for copper pipe joints in advanced thermal systems
Antonio pereira bastos; D Sathishkumar; Dias, João M.S.; Horovistiz, Ana
Research Summit 2025 | 2025The development of wear-resistant composite coatings onto LLDPE substrate for tribological purposes
Ana Horovistiz; António Pereira; Ayda Bouaziz; Basma Ben Difallah; César Cardoso; Maher Dammak; Mohamed Kharrat
Journal of Coatings Technology and Research | 2025Sustainable Monocoque Materials for Application in E-Scooter Chassis: Mechanical Properties of Highly Biodegradable Polymer Composites
Constantinescu, Gabriel; Henriques, Mário Sousa; Horovistiz, Ana; Santos, José Paulo
Materials Science Forum | 2025Advances in Induction Brazing of Copper and Dissimilar Metals: Challenges and Emerging Trends
Bastos, Antonio A.; Dias, João M.S.; Fonseca, Pedro; Horovistiz, Ana; Lemma, Eyuel A.
Journal of Advanced Joining Processes | 2025Smart E-bike systems: Integrating own rider information for improving riding experience
António Manuel de Bastos Pereira; Gabriel Constantinescu; Horovistiz, Ana; José Maria Fernandes; José Paulo Oliveira Santos; Margarida Isabel Cabrita Marques Coelho; Mario Sousa Henriques; Syed Tahir Ali Shah
1ª Conferência AM2R: O Futuro da Mobilidade Sustentável, de Portugal para o Mundo | 2024Extending IoT Networks with the Human Factor: An Example for an E-bike Scenario
António Manuel de Bastos Pereira; Constantinescu, Gabriel; Horovistiz, Ana; José Maria Fernandes; José Paulo Oliveira Santos; Margarida Isabel Cabrita Marques Coelho; Mario Sousa Henriques; Syed Tahir Ali Shah
TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2024Advancements in Welding Techniques for Copper Pipes in Heat Pump Systems: A Comparative Analysis
António Manuel de Bastos Pereira; D Sathishkumar; Dias, João M.S.; Diogo Costa; Horovistiz, Ana; Joana Batista; Lemma, eyuel; Mascate, Bernardo; Silva, Nélia
77th IIW – Annual Assembly and International Conference on Welding and Joining 2024 | 2024Microstructural, Mechanical and Tribological Behaviors of Cu/LLDPE-Based Composite Coatings for Lightweight Applications
Ana Horovistiz; António Pereira; Ayda Bouaziz; Basma Ben Difallah; César Cardoso; Maher Dammak; Mohamed Kharrat
Lubricants | 2024Digital image processing algorithm for industrial on-site roughness evaluation in Ti-alloy machining
Davim, J. P.; Horovistiz, Ana; RIBEIRO CARVALHO, Sílvia Daniela
ESAFORM 2024- 27th International ESAFORM Conference on Material Forming (ESAFORM 2024) will be hosted by the Clément Ader Institute (ICA, CNRS UMR 5312) and ENIT (ENI Tarbes – LGP Production Engineering Laboratory). | 2024A hybrid numerical and experimental approach towards Ti6Al4V alloy sustainable orthogonal turning
Carvalho, Sílvia Ribeiro; Davim, J.P.; Horovistiz, Ana
Journal of Cleaner Production | 2024Computer vision-based solutions to overcome the limitations of wireless capsule endoscopy
Araújo, Helder; Horovistiz, Ana; Oliveira, Marina
Journal of Medical Engineering & Technology | 2024Brazing of Copper Pipes for Heat Pump and Refrigeration Applications
Dias, João M. S.; Duraisamy, Sathishkumar; Horovistiz, Ana; Pereira, Antonio B.; Rios, José P.; Silva, Nélia M.
Metals | 2024The development of wear-resistant composite coatings onto LLDPE substrate for tribological purposes.
António Pereira; Ayda Bouaziz; Basma Ben Difallah; César Cardoso; Horovistiz, Ana; Maher Dammak; Mohamed Kharra
Journal: Journal of Coatings Technology and Research | 2024Induction brazing of copper pipes for the manufacturing of heat pumps
Dias, João M.S.; Fonseca, Pedro; Horovistiz, Ana; Lemma, eyuel; Pereira, Antonio
TEchMA 2024 - 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2024Electron Beam Welding for Heat Pump Manufacturing
Dias, João M.S.; Duraisamy, Sathishkumar; Ferreira, Nelson; Horovistiz, Ana; Pereira, Antonio
TEchMA 2024 - 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions | 2024Advancements in Welding Techniques for Copper Pipes in Heat Pump Systems: A Comparative Analysis
Batista, Joana; Costa, Diogo; Dias, João M.S.; Duraisamy, Sathishkumar; Horovistiz, Ana; Lemma, eyuel; Mascate, Bernardo; Pereira, Antonio; Silva, Nélia
77th IIW – Annual Assembly and International Conference on Welding and Joining 2024 | 2024An Image Processing Approach for Morphology Characterization of Serration in Ti-6Al-7Nb Chip Sliding Surface
Ana Horovistiz; J. P. Davim; Sílvia Carvalho
FAIM2023: International Conference on Flexible Automation and Intelligent Manufacturing | 2023The role of roughness parameters in grading the machined surface quality in Ti-alloys
Ana Horovistiz; João Paulo Davim; Sílvia Ribeiro Carvalho
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2023Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface
Ana Horovistiz; J Paulo Davim; João Almeida
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2023Morphological characterization of chip segmentation in Ti-6Al-7Nb machining: A novel method based on digital image processing
Carvalho, Sílvia; Davim, J.P.; Horovistiz, Ana
Measurement | 2023Digital representation of the wear behaviour of Ti alloys: A fractal analysis
Davim, J. Paulo; Horovistiz, Ana; João Almeida
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2023Comparative study of titanium alloys machinability used for medical applications
A. Horovistiz; A. J. Festas; A. Ramos; J. P. Davim; S. Carvalho
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022Development of FEM-based digital twins for machining difficult-to-cut materials: A roadmap for sustainability
Ana, Horovistiz; Davim, J.P.; Lauro, C.H.; Sílvia, Ribeiro-Carvalho
Journal of Manufacturing Processes | 2022Comparative study of titanium alloys machinability used for medical applications
Carvalho, S.; Davim, J. P.; Festas, A. J.; Horovistiz, A.; Ramos, A.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022Morphological characterization of chip segmentation in Ti-6Al-7Nb machining: A novel method based on digital image processing
Davim, J. P.; Horovistiz, Ana; Ribeiro-Carvalho, Sílvia
Measuremnt | 2022Material model assessment in Ti6Al4V machining simulations with FEM
Davim, J Paulo; Horovistiz, Ana; Ribeiro-Carvalho, Sílvia
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | 2021Multi-objective optimization of Ti6Al4V machining using numerical simulation with FEM
Horovistiz, Ana; J. P. Davim; Ribeiro-Carvalho, Sílvia
4rd International conference on technologies for the wellbeing and sustainable manufacturing solutions | 2021Surface topography in machining Ti alloys for biomedical applications: correlative microscopy approach for qualitative and quantitative analysis
Horovistiz, Ana; J. P. Davim; Ribeiro-Carvalho, Sílvia
The International Journal of Advanced Manufacturing Technology | 2021Intelligent machining methods for Ti6Al4V: A review
Davim, J. Paulo; Horovistiz, Ana; Pereira, RBD; Ribeiro-Carvalho, Sílvia
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2020Machining of Ti6Al4V alloy: A numerical and Experimental Approach
Horovistiz, Ana; J. P. Davim; Ribeiro-Carvalho, Sílvia
3rd International conference on materials design and applications | 2020Material behaviour models of Ti6Al4V machining using finite element analysis
Horovistiz, Ana; J. Paulo Davim; Silvia Daniela Ribeiro Carvalho
3rd International Conference on Technologies of the Welbeing and Sustainable Manufacturing Solutions | 2020Digital tribology and the Industry 4.0 – a note
Horovistiz, Ana; J.Paulo Davim
Manufacturing in Digital Industries | 2020Correlative microscopy analysis of surface topography in machining Ti-6Al-7Nb
António Festas; Horovistiz, Ana; J.Paulo Davim; Silvia Daniela Ribeiro Carvalho
13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’19 | 2019Comparasion of surface topography in machining Ti alloys for biomedical applications: Correlative microscopy approach for qualitative and quantitative analysis
Carvalho, Sílvia; Festas, António; Horovistiz, Ana; J. P. Davim
2nd International Conference on Nanomaterials Science and Mechanical Engineer | 20193-D reconstruction by extended depth-of-field in tribological analysis: Fractal approach of sliding surface in Polyamide66 with glass fiber reinforcement
Horovistiz, Ana
Polymer Testing | 2019Tribological behavior of PA66+MoS2 and PA66GF30 under water lubrication
Horovistiz, Ana; J. Paulo Davim
Journal of Manufacturing Technology Research | 2019Comparison of surface topography in machining Ti alloys for biomedical applications: Correlative microscopy approach for qualitative and quantitative analysis
António Festas; Horovistiz, Ana; J. Paulo Davim; Silvia Daniela Ribeiro Carvalho
2 nd International Conference on Nanomaterials Science and Mechanical Engineering University of Aveiro, Portugal, July 9-12, 2019 | 2019Influence of sliding velocity on the tribological behavior of PA66GF30 and PA66 + MoS2: an analysis of morphology of sliding surface by digital image processing
Horovistiz, Ana; J. P. Davim; Laranjeira Susana
Polymer Bulletin | 2018Effect of glass fiber reinforcement and the addition of MoS2 on the tribological behavior of PA66 under dry sliding conditions: A study of distribution of pixel intensity on the counterface
Horovistiz, Ana; J. Paulo Davim
Wear of Composite Materials | 2018Morphological characterization of surfaces manufactured by High-speed machining: Fractal approach of surface topography of tibial insert in UHMWPE
António Completo; Francisco Lopes; Horovistiz, Ana; J.Paulo Davim
International Conference on Nanomaterials Science and Mechanical Engineering University of Aveiro, Portugal, July 16-18, 2018 | 2018Design of interconnected celular ceramics
Horovistiz, Ana
Conference: ECERS2015 | 2016Electrochemical deposition of Fe and Fe/CNTs composites from strongly alkaline hematite suspensions
Frade, J.R.; Horovistiz, A.L.; Ivanou, D.K.; Ivanova, Y.A.; Mata, D.; Monteiro, J.F.; Silva, R.F.
Journal of Applied Electrochemistry | 2015http://www.scopus.com/inward/record.url?eid=2-s2.0-84923062012&partnerID=MN8TOARS
Carbon nanotube-based bioceramic grafts for electrotherapy of bone
Belmonte, M.; Branco, I.; Ferreira, N.M.; Ferro, M.; Horovistiz, A.L.; Lopes, M.A.; Mata, D.; Oliveira, F.J.; Silva, R.F.
Materials Science and Engineering C | 2014http://www.scopus.com/inward/record.url?eid=2-s2.0-84889101629&partnerID=MN8TOARS
Electrical conductivity and microstructure relationship in ternary systems based on cerium oxide
Horovistiz, A.L.; Muccillo, E.N.S.; Rocha, R.A.
Ceramics International | 2013http://www.scopus.com/inward/record.url?eid=2-s2.0-84875701384&partnerID=MN8TOARS
Quantification of microstructural features in carbon nanotube/nanodiamond hybrids
Costa, F.M.; Fernandes, A.J.S.; Horovistiz, A.L.; Silva, R.F.
2012Microstructural and electrical characterizations of chemically prepared Ce 0.8Gd 0.2- x(Ag, Sr) xO 1.9 (0 = x = 0.02)
Horovistiz, A.L.; Muccillo, E.N.S.
Solid State Ionics | 2012http://www.scopus.com/inward/record.url?eid=2-s2.0-84867580194&partnerID=MN8TOARS
Quantification of microstructural features in gadolinia-doped ceria containing co-additives by digital image analysis
Horovistiz, A.L.; Muccillo, E.N.S.
Journal of the European Ceramic Society | 2011http://www.scopus.com/inward/record.url?eid=2-s2.0-79953326913&partnerID=MN8TOARS
3-D reconstruction by extended depth-of-field in failure analysis - Case study I: Qualitative fractographic investigation of fractured bolts in a partial valve
de Campos, K.A.; de Oliveira Caltabiano, P.C.R.; Hein, L.R.d.O.; Horovistiz, A.L.
Engineering Failure Analysis | 2010http://www.scopus.com/inward/record.url?eid=2-s2.0-72949096325&partnerID=MN8TOARS
Fractal characterization of brittle fracture in ceramics under mode I stress loading
de Campos, K.A.; Hein, L.R.d.O.; Horovistiz, A.L.; Prado, C.C.S.; Shibata, S.
Materials Science and Engineering A | 2010http://www.scopus.com/inward/record.url?eid=2-s2.0-77955984089&partnerID=MN8TOARS
De-convolution of bulk and interfacial contributions based on impedance spectroscopy with external load resistance
Abrantes, J.C.C.; Ferreira, A.A.L.; Frade, J.R.; Horovistiz, A.L.; Núñez, P.; Pérez-Coll, D.
Materials Research Bulletin | 2009http://www.scopus.com/inward/record.url?eid=2-s2.0-59849129801&partnerID=MN8TOARS
Effects of composition and frozen-in conditions on bulk and grain boundary conductivities of Yb2Ti2O7-based materials
Abrantes, J.C.C.; Boguslavskii, M.V.; Fagg, D.P.; Frade, J.R.; Horovistiz, A.L.; Shcherbakova, L.G.; Shlyakhtina, A.V.
Solid State Ionics | 2009http://www.scopus.com/inward/record.url?eid=2-s2.0-67349084098&partnerID=MN8TOARS
Effects of Yb:Ti ratio on transport properties of Yb2 ± xTi2 ± xO7 ± d
Abrantes, J.C.C.; Fagg, D.P.; Frade, J.R.; Horovistiz, A.L.
Solid State Ionics | 2008http://www.scopus.com/inward/record.url?eid=2-s2.0-48349139079&partnerID=MN8TOARS
Interpretation of impedance spectra based on local minima of imaginary Z vs frequency
Abrantes, J.C.C.; Ferreira, A.A.L.; Frade, J.R.; Horovistiz, A.L.
Electrochimica Acta | 2008http://www.scopus.com/inward/record.url?eid=2-s2.0-50649094476&partnerID=MN8TOARS
Effects of Fe-additions on sintering and transport properties of Yb2Ti2 - yFeyO7 - d
Abrantes, J.C.C.; Fagg, D.P.; Frade, J.R.; Horovistiz, A.L.
Journal of the European Ceramic Society | 2007http://www.scopus.com/inward/record.url?eid=2-s2.0-34347324024&partnerID=MN8TOARS
Ionic and electronic conductivity of Yb2+xTi2-xO7-x/2 materials
Abrantes, J.C.C.; Fagg, D.P.; Frade, J.R.; Horovistiz, A.L.; Levchenko, A.; Shcherbakova, L.G.; Shlyakhtina, A.V.
Solid State Ionics | 2006http://www.scopus.com/inward/record.url?eid=2-s2.0-33750021427&partnerID=MN8TOARS
Microstructure and electrical conductivity of Yb2+xTi 2-xO7-x/2 materials
Abrantes, J.C.C.; Frade, J.R.; Horovistiz, A.L.; Levchenko, A.; Shcherbakova, L.G.; Shlyakhtina, A.V.
3rd International Materials Symposium and 12th Portuguese Materials Society Meeting 2005 | 2005Fractal analysis along stretch zone for an aluminum alloy
Hein, L.R.O.; Horovistiz, A.L.
Materials Letters | 2005http://www.scopus.com/inward/record.url?eid=2-s2.0-12344272146&partnerID=MN8TOARS
Comparison of fracture surface and plane section analysis for ceramic grain size characterisation
Frade, J.R.; Hein, L.R.O.; Horovistiz, A.L.
Journal of the European Ceramic Society | 2004http://www.scopus.com/inward/record.url?eid=2-s2.0-0242666310&partnerID=MN8TOARS
An image analysis study of pit formation on Ti-6Al-4V
Codaro, E.N.; Hein, L.R.O.; Horovistiz, A.L.; Nakazato, R.Z.; Ribeiro, L.M.F.; Ribeiro, R.B.
Materials Science and Engineering A | 2003http://www.scopus.com/inward/record.url?eid=2-s2.0-0037454547&partnerID=MN8TOARS
Quantitative fractography under light microscopy: A digital image processing approach | Quantitative fraktographie mittels lichtmikroskopie: Näherung durch digitale bildverarbeltung
Campos, K.A.; Guimarães, V.A.; Hein, L.R.d.O.; Horovistiz, A.L.; Jesuino, G.A.; Ribeiro, L.M.F.
Praktische Metallographie/Practical Metallography | 2003http://www.scopus.com/inward/record.url?eid=2-s2.0-0037330549&partnerID=MN8TOARS
An image processing method for morphology characterization and pitting corrosion evaluation
Codaro, E.N.; Hein, L.R.O.; Horovistiz, A.L.; Nakazato, R.Z.; Ribeiro, L.M.F.; Ribeiro, R.B.
Materials Science and Engineering A | 2002http://www.scopus.com/inward/record.url?eid=2-s2.0-0036721150&partnerID=MN8TOARS
Fractal analysis of eroded surfaces by digital image processing
Abbade, N.P.; Crnkovic, S.J.; Hein, L.R.d.O.; Horovistiz, A.L.; Jesuino, G.A.; Ribeiro, L.M.F
Materials Letters | 2002http://www.scopus.com/inward/record.url?eid=2-s2.0-0036796035&partnerID=MN8TOARS
Metallurgical study of aluminium alloys used as aircraft components | Eine metallurgische Studie des Einsatzes von Aluminium legierungen in Flugzeugbauteilen
Codaro, E.N.; Hein, L.R.O.; Horovistiz, A.L.; Nakazato, R.Z.
Praktische Metallographie/Practical Metallography | 2001http://www.scopus.com/inward/record.url?eid=2-s2.0-0034830404&partnerID=MN8TOARS